888896 Seawater Pipe | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta seawater pipe running from the sea water pump to the charge air cooler, from the Cooling System group, weighing 1.602 kg and listed for 4 applications across the D and MD engine series. That routing is what identifies it against the other cooling system pipework listed here.

🚤 Compatibility

Typically suits:

• Volvo Penta D5A-B TA
• Volvo Penta D5A-TA
• Volvo Penta MD2010
• Volvo Penta MD2010B

• Engine Family: D, MD

⚙️ Key Features

• Runs from the sea water pump to the charge air cooler
• 1.602 kg
• 4 listed applications across the D and MD series
• Cooling System group

🔌 Function

Carries raw seawater from the sea water pump to the charge air cooler.

⚠️ Common Signs of Failure

• Seawater weeping or dripping from the pipe or a joint
• Charge air temperatures up, or poor performance from restricted raw water flow
• Corrosion pitting or a pinhole in the pipe wall, salt-crusted at the leak
• Bore silted, scaled or blocked with debris
• Joint faces eroded or the fixings seized

🛠️ Service Notes

• Check the raw water strainer, impeller and the rest of the seawater circuit while the pipe is off — debris that blocked this pipe is still in the system
• Renew the sealing rings and gaskets, and take care with seized fixings in a salt-water circuit rather than shearing them
• Run up and check for leaks before leaving the boat unattended

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging