88890022 Hose | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta hose weighing 0.079 kg. Weight is the only figure published against it, and it is not enough to identify a hose on the bench, so quote part number 88890022 and check it against the illustration for the assembly you are working on.

⚙️ Key Features

• 0.079 kg
• Order by part number
• Check against the illustration before ordering

🔌 Function

Carries fluid or air between two connection points.

⚠️ Common Signs of Failure

• Weeping, dripping or bubbling at the ends
• Bulging, ballooning or a soft spot along the length
• Surface cracked, crazed or gone hard
• Ends split or the fitting pulling out

🛠️ Service Notes

• Fit hoses only to clean, sound spigots — take off old rubber, scale and corrosion, and renew the spigot or pipe if it is pitted, because no clamp will seal a rough sealing face
• Push the hose fully home so the clamp sits behind the bead or barb rather than over the end of the spigot, and fit new clamps whenever a hose is renewed
• Let the hose follow its natural bend with no kinks and no tension on either connection, clear of hot surfaces and moving parts, with chafe protection wherever it passes a bracket, edge or bulkhead
• Use the correct grade of hose for the duty, and clamp to the standard the installation demands — twin clamps are normal practice on seawater and fuel connections below the waterline
• Refill, vent and run the engine, then check every joint hot and cold and recheck the clamps after the first running period as the hose beds down

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging