889136 Hose | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta hose weighing 1.445 kg. Return hose 889148 in this same run is listed at 1.406 kg, within forty grams of it, and no length, bore or fitment is published against either, so order by part number 889136 and check it against the illustration.

⚙️ Key Features

• 1.445 kg
• Within forty grams of return hose 889148
• Order by part number, not by weight

🔌 Function

Carries fluid between two connection points.

⚠️ Common Signs of Failure

• Weeping, dripping or bubbling at the ends
• Bulging, ballooning or a soft spot along the length
• Cover cracked, crazed or gone hard
• Hose kinked, crushed or chafed where it passes a bracket

🛠️ Service Notes

• Fit hoses only to clean, sound spigots — take off old rubber, scale and corrosion, and renew the spigot or pipe if it is pitted, because no clamp will seal a rough sealing face
• Push the hose fully home so the clamp sits behind the bead or barb rather than over the end of the spigot, and fit new clamps whenever a hose is renewed
• Let the hose follow its natural bend with no kinks and no tension on either connection, clear of hot surfaces and moving parts, with chafe protection wherever it passes a bracket, edge or bulkhead
• Use the correct grade of hose for the duty, and clamp to the standard the installation demands — twin clamps are normal practice on seawater and fuel connections below the waterline
• Refill, vent and run the engine, then check every joint hot and cold and recheck the clamps after the first running period as the hose beds down

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging