89-825096T01 Aftermarket Mercury BRP Starter Solenoid | Sawley's Select Marine Parts

🔧 Product Description

Aftermarket Mercury / Mariner & Suzuki-Built Johnson/Evinrude Starter Solenoid - Part Number: 89-825096T01

New aftermarket 12-volt starter solenoid for Mercury and Mariner four-stroke outboards and corresponding Suzuki-built Johnson/Evinrude applications. The supplied Bombardier wording reflects the 5030783/5031483 cross-reference, but the primary Mercury service family is 825096T01 and later 8M0098898.

⚙️ Key Features

• 12-volt marine starter-solenoid assembly

• High-current switching contacts for the starter motor

• Low-current start-signal terminals

• Corrosion-resistant marine terminal and housing design

• Cross-applies between Mercury/Mariner and Suzuki-built Johnson/Evinrude engines

• Exact terminal layout and mounting pattern must match the removed solenoid

🧰 Assembly Contents

• 1 × Complete starter solenoid - Part Number: 89-825096T01

• 1 × Internal pull-in/hold-in coil system

• 1 × Internal high-current contact and plunger assembly

• 1 × Terminal and mounting housing

• Starter motor, battery cables and mounting fasteners are not included unless stated

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 8M0098898 → Later Mercury service replacement for 89-825096T01 / 825096T

• 89-825096T01 / 825096T → Earlier Mercury starter-solenoid references

OEM / Related Numbers:

• 89-825096T01

• 825096T01

• 89-825096T

• 825096T

• 8M0098898

• Johnson / Evinrude / OMC 5030783

• Johnson / Evinrude / OMC 5031483

Aftermarket / Verified Equivalents:

• Sierra Marine: 18-5821

• Arrowhead: SMU6008

• J&N: 240-22016

• WAI: 67-734

• Recmar: REC89-825096T01

🚤 Compatibility

Commonly used on:

• Mercury/Mariner four-stroke and Suzuki-built Johnson/Evinrude starter-control circuits

Typically suits:

• Mercury/Mariner 8HP four-stroke - principally 2001-2005

• Mercury/Mariner 9.9HP four-stroke - principally 1999-2005

• Mercury/Mariner 15HP four-stroke - principally 1998-2006

• Mercury/Mariner 30HP four-stroke - principally 2002-2010

• Mercury/Mariner 40HP and 45HP four-stroke applications using 825096T01

• Mercury/Mariner 50HP and 60HP four-stroke - principally 2001-2010

• Mercury/Mariner 75HP and 90HP four-stroke - principally 2000-2006

• Mercury/Mariner 80HP, 100HP and 115HP four-stroke applications using 825096T01

• Suzuki-built Johnson/Evinrude engines whose parts catalogue specifies 5030783 or 5031483

• HP Range: Approximately 8-115 HP, controlled by engine family and original solenoid number

• Engine Type: Four-stroke petrol outboard

• Year Range: Principally 1998-2010 across the verified application groups

• Serial / Model Identification: Confirm 12V, terminal arrangement, mounting pattern and one of the Mercury 825096/8M0098898 or OMC 5030783/5031483 references.

🔌 Function

The solenoid uses the low-current start signal to close a high-current circuit between the battery and starter motor. It allows the key switch and wiring harness to control starter current without carrying the full motor load.

Common signs of failure:

• Clicking without starter-motor operation

• No click despite a correct start signal

• Intermittent cranking from burnt or pitted internal contacts

• Starter remains energised after the key is released

• Heat-damaged terminals, loose studs or melted insulation

• Internal corrosion or an open solenoid coil

📦 Condition

• Brand-new aftermarket replacement starter solenoid

• New and unused

• Supplied in suitable manufacturer or equivalent protective packaging