952996 Stud | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta stud, 95 mm long, weighing 0.051 kg and listed for 9 applications across the D, TD and MD series. Length is the ordering detail — 952999 is the 110 mm stud in the same block — and across Volvo Penta's stud range quite different lengths share the same published mass, so measure the stud you are replacing rather than weighing it.

🚤 Compatibility

Typically suits:

• Volvo Penta D5A-B TA
• Volvo Penta D5A-T
• Volvo Penta D5A-TA
• Volvo Penta TD31ACE
• Volvo Penta D7A-B TA
• Volvo Penta D7A-T
• Volvo Penta D7A-TA
• Volvo Penta MD2010
• Volvo Penta MD2010B

• Engine Family: D, TD, MD

⚙️ Key Features

• 95 mm long
• 0.051 kg
• 9 applications across the D, TD and MD series
• Order by length — 952999 is the 110 mm stud
• 4 used per assembly

🔌 Function

Screws permanently into the casting and presents a fixed thread for the nut, so the joint can be broken and remade without wearing the threads in the parent metal.

⚠️ Common Signs of Failure

• Nut unscrews the stud out of the casting instead of coming off it
• Thread corroded, pitted or seized solid
• Stud visibly necked or stretched near the nut end
• Snapped flush with the casting face
• The joint at that position weeps or blows because clamp load has been lost

🛠️ Service Notes

• If the stud came out with the nut, check the female thread in the casting before fitting the new one
• Clean the casting thread out properly — a rusty bore will give a false torque reading long before the stud is home

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging