Skip to product information
1 of 1

953519 Stud | Genuine Volvo Penta Part

953519 Stud | Genuine Volvo Penta Part

Regular price $6.31 AUD
Regular price Sale price $6.31 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

🔧 Product Description

Genuine Volvo Penta stud weighing 0.034 kg and listed for 16 applications. No length, thread size or engine family is published, and the M8 x 100 mm stud 953062 carries the same weight, so the part number is the only reliable way to order this one.

🚤 Compatibility

Typically suits:

  • Volvo Penta 8.1GiI-A
  • Volvo Penta 8.1GiI-B
  • Volvo Penta 8.1GiI-C
  • Volvo Penta 8.1GiI-D
  • Volvo Penta 8.1GiI-E
  • Volvo Penta 8.1GiI-F
  • Volvo Penta 8.1GiI-G
  • Volvo Penta 8.1GiI-H
  • Volvo Penta 8.1GSiI-A
  • Volvo Penta 8.1GXiI-A
  • Volvo Penta 8.1GXiI-B
  • Volvo Penta 8.1GXiI-C
  • Volvo Penta 8.1GXiI-D
  • Volvo Penta 8.1GXiI-E
  • Volvo Penta 8.1GXiI-F
  • Volvo Penta 8.1GXiI-G

⚙️ Key Features

  • 0.034 kg
  • 16 applications listed
  • 953062 shares its weight but is the M8 x 100 mm stud
  • Order strictly by part number

🔌 Function

Screws into the casting and presents the fixed thread the clamping nut tightens onto.

⚠️ Common Signs of Failure

  • Stud winds out with the nut instead of releasing it
  • Thread corroded or galled
  • Stripped or crossed thread on the exposed end
  • Snapped flush with the casting

🛠️ Service Notes

  • Clean and chase the female thread before fitting so the stud can pull down square and to full depth
  • Screw studs in with a proper stud installer or the double-nut method; gripping the plain shank with pliers or self-grips scores it and the nut will never seat or torque correctly afterwards
  • Screw the stud home until it seats as the manual for your engine describes, and no further — a stud wound in hard to cure a slack thread will simply split the casting
  • Renew studs that are stretched, necked, bent or corroded rather than reusing them; exhaust and manifold studs in particular are cheap next to the work of extracting a broken one
  • Tighten the nuts to the torque figures and in the sequence given in the workshop manual for your engine, and where a stud passes into an oil or coolant space seal it as the manual specifies

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging
View full details