963701 Hex Socket Screw | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta hex socket screw weighing 0.034 kg and listed for 7 applications across the BB and K series.

🚤 Compatibility

Typically suits:

• Volvo Penta 740A
• Volvo Penta BB740A
• Volvo Penta K25
• Volvo Penta K28
• Volvo Penta K32
• Volvo Penta K36
• Volvo Penta K40

• Engine Family: BB, K

⚙️ Key Features

• 0.034 kg
• 7 applications across the BB and K series
• Hex key drive
• 2 used per assembly

🔌 Function

Clamps two components together, driven by a hex key seated in the recessed head.

⚠️ Common Signs of Failure

• Head recess rounded out so a key no longer bites
• Corrosion or salt scale packed into the socket
• Thread stripped or pulled
• Screw backing out and the joint working loose

🛠️ Service Notes

• Use a hex key or bit that fills the socket fully and is not rounded off — a sloppy tool fit is what ruins these heads
• Clean paint, sealant and dirt out of the socket before engaging the tool, and check the threads and the mating face are clean and dry
• Tighten to the figure and sequence given in the workshop manual for the assembly, rather than by feel — socket screws are often used where clamp load matters and access is poor
• Renew any screw whose socket is damaged, and refit with thread-locking compound only where the manual for that assembly calls for it
• Start every screw by hand so it picks up the thread square, particularly into aluminium housings where a cross-threaded start ruins the casting

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging