968975 Stud | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta stud, 80 mm long, listed for 42 applications across the TD, TWD, TID, KAD and KAMD engine families. The parts listing cross-refers to group 2A for the assembly it belongs to.

🚤 Compatibility

• Engine Family: TD, TWD, TID, KAD, KAMD

Full model list at the end of this description.

⚙️ Key Features

• 80 mm long
• Cross-referred to group 2A
• 42 applications
• TD, TWD, TID, KAD and KAMD families
• L=80mm (Volvo assembly listing)
• Quantity varies by assembly, most commonly two

🔌 Function

Screws permanently into a casting to give a fixed threaded anchor, so the component above it can be clamped with a nut and removed again without wearing the thread in the casting.

⚠️ Common Signs of Failure

• Nut turns without pulling the joint up tight
• Stud winds out with the nut when the joint is undone
• Thread necked, stretched or corroded at the root
• Joint weeping or blowing where the stud clamps it
• Nut will not run down the full length by hand

🛠️ Service Notes

• Length is the identifying detail here at 80 mm, so measure the stud you remove before ordering
• Renew any stud that comes out with its nut rather than refitting it

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TID121KG, TID121KGP, TID121KP, TID121KPB, TID121L, TID121LG, TID121LGP, TID121LP, TID121LPB, TID121K, TID121K-87
• Volvo Penta TD121GGP-87, TD121G, TD121GG, TD121GGP, TD121GP, TD121GPB
• Volvo Penta KAD42A, KAD42B, KAD42P-A
• Volvo Penta KAD44P, KAD44P-B, KAD44P-C
• Volvo Penta KAMD42A, KAMD42B, KAMD42P-A
• Volvo Penta KAMD43P, KAMD43P-A, KAMD43P-B
• Volvo Penta KAMD44P-B, KAMD44P-C, KAMD44P-A
• Volvo Penta KAD43P-B, KAD43P-A
• Volvo Penta 2003D, 2002D
• Volvo Penta KAD300-A
• Volvo Penta KAD32P
• Volvo Penta KAMD300-A
• Volvo Penta TD120HP
• Volvo Penta TWD1210G
• Volvo Penta TWD1211G