975112 Flange Screw | Genuine Volvo Penta Part
975112 Flange Screw | Genuine Volvo Penta Part
Couldn't load pickup availability
In stock — Australian warehouse
Typically reaches our store in 3–5 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Genuine Volvo Penta flange screw weighing 0.073 kg and listed for 28 applications across TAD, D and TWD series engines. No length or thread size is published for it, so work from the parts list for your engine — the flange screws in this run run from 35 mm to 120 mm where a length is given at all.
🚤 Compatibility
- Engine Family: TAD, D, TWD
Full model list at the end of this description.
⚙️ Key Features
- 0.073 kg
- 28 applications across TAD, D and TWD series
- Integral flange head, no separate washer required
- Quantity varies by assembly, most commonly one
🔌 Function
Clamps two components together, the integral flange under the head spreading the load so no separate washer is needed.
⚠️ Common Signs of Failure
- Joint working loose or weeping around the fastener
- Flange face scored, dished or picked up
- Thread stripped, galled or seized in the tapped hole
- Head rounded by a worn socket
- Corrosion under the flange face
🛠️ Service Notes
- The integral flange spreads the load and forms the bearing face, so do not add a separate washer unless the workshop manual for your engine specifically calls for one
- Clean the threads and the seating face before fitting — grit, paint or old sealant under the flange gives a false torque reading and the joint will slacken off in service
- Where the flange is serrated it must bear directly on clean metal to grip; discard any screw with a deformed flange or damaged serrations rather than reusing it
- Tighten to the torque and sequence given in the workshop manual for your engine, and treat the screw as single-use where the manual specifies an angle-tightened or stretch fastener
- Check the thread in the receiving component at the same time; a pulled or corroded thread will not hold a new screw however carefully it is torqued
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
🔎 Full Model Compatibility
Typically suits:
- Volvo Penta D16C-A MG, D16C-A MH, D16C-B MH, D16C-C MH, D16C1-E MG, D16C1-F MG, D16C2-E MG, D16C2-F MG, D16C-D MH, D16C1-E MH, D16C1-F MH, D16C2-E MH, D16C2-F MH
- Volvo Penta TAD1351-53VE
- Volvo Penta TAD1371-75VE
- Volvo Penta TAD1380-82GE
- Volvo Penta TAD1381-85VE
- Volvo Penta TAD1384-85VE-IWP
- Volvo Penta TAD1640-42VE-C
- Volvo Penta TWD1643GE
- Volvo Penta TWD1644-45GE
- Volvo Penta TWD1652GE
- Volvo Penta TWD1653GE
- Volvo Penta TWD1663GE
- Volvo Penta TWD1672-1673GE
- Volvo Penta TWD1682-83GE
- Volvo Penta TWD1683VE
- Volvo Penta TWD1744GE
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
