983150 Shim | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta shim, 0.15 mm thick, listed for 33 applications across D-series engines and IPS drives. Shim 983165 is also 0.15 mm and carries the same fitment listing, so thickness alone will not tell the two apart. Match the position the shim came out of as well as its thickness, and order by part number. The published weights in this run do not follow thickness and cannot be used to separate the set.

🚤 Compatibility

• Engine Family: D, IPS
• HP Range: 260-435 HP

Full model list at the end of this description.

⚙️ Key Features

• 0.15 mm thick
• Listed for 33 applications across D-series engines and IPS drives
• Same-thickness twin is 983165 with the same fitment listing
• TH=0.15mm (Volvo assembly listing)

🔌 Function

Sets the endfloat or preload of a bearing or shaft stack by taking up a measured amount of clearance.

⚠️ Common Signs of Failure

• Endfloat or backlash outside specification when the stack is measured
• Whine, growl or rumble from the bearing stack in service
• Shim dished, curled or fretted where it has been clamped
• Bright polished patches or bruising on the shim faces

🛠️ Service Notes

• Measure the shim you removed rather than assuming its thickness, as shims bed in and lose material
• The 0.10 mm and 0.35 mm steps with this fitment listing are 983149 and 983151
• Set the stack up and re-check the reading before final assembly

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D6-330D-E, D6-370D-E, D6-330D-C, D6-370D-C, D6-330D-D, D6-370D-D, D6-330D-F, D6-370D-F, D6-300D-F, D6-310D-D, D6-310D-C, D6-310D-E, D6-435D-D, D6-435D-E, D6-435D-F, D6-435D-C
• Volvo Penta D4-260D-C, D4-260D-D, D4-260D-E, D4-260D-F, D4-300D-C, D4-300D-D, D4-300D-E, D4-300D-F
• Volvo Penta IPS-A, IPS-B, IPS-C, IPS-D, IPS-E, IPS-F
• Volvo Penta 8.1IPSCE-MF, 8.1IPSCE-P, 8.1IPSCE-Q