983154 Shim | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta shim, 0.35 mm thick, listed for 20 applications across DPH, D and DPI drives. Shim 983160 is also 0.35 mm with the same fitment listing, so thickness alone will not tell the two apart. Match the position the shim came out of and order by part number, working from the measured thickness rather than any other figure.

🚤 Compatibility

Typically suits:

• Volvo Penta DPH-D1
• Volvo Penta D6-330A-F
• Volvo Penta D6-370A-F
• Volvo Penta D4-260A-F
• Volvo Penta D4-300A-F
• Volvo Penta D6-300A-F
• Volvo Penta D4-225A-F
• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta DPH-E
• Volvo Penta DPI-A
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D6-400A-F
• Volvo Penta D4-150A-G
• Volvo Penta D4-230A-G
• Volvo Penta D4-270A-G
• Volvo Penta D4-320A-G
• Volvo Penta D4-300A-G

• Engine Family: DPH, D, DPI
• HP Range: 150-440 HP

⚙️ Key Features

• 0.35 mm thick
• Listed for 20 applications across DPH, D and DPI drives
• Same-thickness twin with the same fitment listing is 983160
• Order by measured thickness and position

🔌 Function

Sets the endfloat or preload of a bearing or shaft stack by taking up a measured amount of clearance.

⚠️ Common Signs of Failure

• Endfloat or backlash outside specification when the stack is measured
• Whine, growl or rumble from the bearing stack in service
• Shim dished, curled or fretted where it has been clamped
• Bright polished patches or bruising on the shim faces

🛠️ Service Notes

• Note the position before stripping, as 983160 shares this thickness and fitment listing
• The steps offered with this fitment listing run 0.10, 0.15, 0.225, 0.35 and 0.50 mm
• Measure the shim you removed rather than assuming its thickness

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging