984291 Shim | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta shim, 0.15 mm thick, listed for 20 applications across DPH, D and DPI drives. Two other shims here, 983153 and 983159, are also 0.15 mm with the same fitment listing, so neither thickness nor the application list will tell the three apart. Match the position the shim came out of and order by part number, working from the measured thickness.

🚤 Compatibility

Typically suits:

• Volvo Penta DPH-D1
• Volvo Penta D6-330A-F
• Volvo Penta D6-370A-F
• Volvo Penta D4-260A-F
• Volvo Penta D4-300A-F
• Volvo Penta D6-300A-F
• Volvo Penta D4-225A-F
• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta DPH-E
• Volvo Penta DPI-A
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D6-400A-F
• Volvo Penta D4-150A-G
• Volvo Penta D4-230A-G
• Volvo Penta D4-270A-G
• Volvo Penta D4-320A-G
• Volvo Penta D4-300A-G

• Engine Family: DPH, D, DPI
• HP Range: 150-440 HP

⚙️ Key Features

• 0.15 mm thick
• Listed for 20 applications across DPH, D and DPI drives
• Same-thickness twins with the same fitment listing are 983153 and 983159
• TH=0.15mm (Volvo assembly listing)

🔌 Function

Sets the endfloat or preload of a bearing or shaft stack by taking up a measured amount of clearance.

⚠️ Common Signs of Failure

• Endfloat or backlash outside specification when the stack is measured
• Whine, growl or rumble from the bearing stack in service
• Shim dished, curled or fretted where it has been clamped
• Bright polished patches or bruising on the shim faces

🛠️ Service Notes

• Three shims here share this thickness and fitment listing, so note the position before stripping and order by number
• The other steps in this block are 984290 at 0.10 mm, 984292 at 0.225 mm and 984293 at 0.50 mm
• Measure the shim you removed rather than assuming its thickness

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging