984292 Shim | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta shim, 0.225 mm thick, listed for 20 applications across DPH, D and DPI drives. It is the only 0.225 mm step in this run, which makes it the one thickness in the block you can identify on measurement alone. The published weights across these shims do not follow thickness, so measure rather than compare mass.

🚤 Compatibility

Typically suits:

• Volvo Penta DPH-D1
• Volvo Penta D6-330A-F
• Volvo Penta D6-370A-F
• Volvo Penta D4-260A-F
• Volvo Penta D4-300A-F
• Volvo Penta D6-300A-F
• Volvo Penta D4-225A-F
• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta DPH-E
• Volvo Penta DPI-A
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D6-400A-F
• Volvo Penta D4-150A-G
• Volvo Penta D4-230A-G
• Volvo Penta D4-270A-G
• Volvo Penta D4-320A-G
• Volvo Penta D4-300A-G

• Engine Family: DPH, D, DPI
• HP Range: 150-440 HP

⚙️ Key Features

• 0.225 mm thick
• Listed for 20 applications across DPH, D and DPI drives
• The only 0.225 mm step in this run
• TH=0.225mm (Volvo assembly listing)

🔌 Function

Sets the endfloat or preload of a bearing or shaft stack by taking up a measured amount of clearance.

⚠️ Common Signs of Failure

• Endfloat or backlash outside specification when the stack is measured
• Whine, growl or rumble from the bearing stack in service
• Shim dished, curled or fretted where it has been clamped
• Bright polished patches or bruising on the shim faces

🛠️ Service Notes

• The other steps in this block are 984290 at 0.10 mm, 984291 at 0.15 mm and 984293 at 0.50 mm
• Measure the shim you removed rather than assuming its thickness, as shims bed in and lose material
• Set the stack up and re-check the reading before final assembly

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging