Skip to product information
1 of 1

991635 Hexagon Screw | Genuine Volvo Penta Part

991635 Hexagon Screw | Genuine Volvo Penta Part

Regular price $33.58 AUD
Regular price Sale price $33.58 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

βœ“ Authorised Volvo Penta Dealer Β· Genuine Volvo Penta parts Β· Ships Australia-wide

πŸ”§ Product Description

Genuine Volvo Penta hexagon screw weighing 0.052 kg and listed for 18 applications across the D series. No thread size or length is published for it, so order on the part number β€” the other hexagon screw in this run, 992480, is a much heavier fastener at 0.345 kg on TAD and TADH applications.

🚀 Compatibility

Typically suits:

  • Volvo Penta D3-140A-D
  • Volvo Penta D3-170A-D
  • Volvo Penta D3-140I-D
  • Volvo Penta D3-140A-E
  • Volvo Penta D3-170A-E
  • Volvo Penta D3-140I-E
  • Volvo Penta D3-140A-F
  • Volvo Penta D3-170A-F
  • Volvo Penta D3-140I-F
  • Volvo Penta D3-110I-D
  • Volvo Penta D3-150I-D
  • Volvo Penta D3-170I-D
  • Volvo Penta D3-110I-E
  • Volvo Penta D3-150I-E
  • Volvo Penta D3-170I-E
  • Volvo Penta D3-110I-F
  • Volvo Penta D3-150I-F
  • Volvo Penta D3-170I-F
  • Engine Family: D
  • HP Range: 110-170 HP

βš™οΈ Key Features

  • 0.052 kg
  • 18 applications across the D series
  • No published thread size or length

πŸ”Œ Function

Clamps a joint using a plain hexagon head driven by a spanner or socket.

⚠️ Common Signs of Failure

  • Joint working loose or fretting
  • Thread stripped, stretched or pulled
  • Hexagon head rounded off
  • Corrosion or seizure in the threaded hole

πŸ› οΈ Service Notes

  • Check the length, thread and strength grade of the replacement against the screw you removed β€” engine fasteners are chosen for a specific clamp load, and a longer or softer screw is not a substitute
  • Clean the threads in the component and make sure the mating faces are clean and flat before assembly; dirt, paint or old sealant in a joint feels like tightness and leaves the joint loose
  • Tighten to the torque figure and the tightening sequence given in the workshop manual for your engine, working up progressively rather than pulling each screw down in one go
  • Use thread locking or sealing compound only where the manual calls for it, and renew the locking washer, tab washer or nut that works with the screw
  • Renew rather than reuse screws that are corroded, thread-damaged or visibly stretched, and any screw the manual tightens by torque-plus-angle

πŸ“¦ Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide β€” $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns β€” if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy β€” we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details