993806 Stud | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta stud weighing 0.023 kg and listed for 25 applications on D series engines. Seven studs share this number range and several are close together on weight, so where the published length is not given the part number is the only safe guide.

🚤 Compatibility

• Engine Family: D

Full model list at the end of this description.

⚙️ Key Features

• 0.023 kg
• Listed for 25 applications
• Fits D series engines
• 4 used per assembly

🔌 Function

Screws permanently into the casting to give a fixed threaded spigot, so the component can be located and clamped with a nut without cutting the parent thread each time.

⚠️ Common Signs of Failure

• Nut will not hold torque, or winds the stud out instead of tightening
• Stud comes away with the nut on dismantling
• Thread stripped, stretched or corroded
• Stud snapped level with the casting face

🛠️ Service Notes

• Check the tapped hole in the casting before fitting - if the parent thread has pulled, a new stud will not cure the joint on its own
• Wind the stud to the correct depth and let it settle before torquing the nut

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13C1-A MP, D13C3-A MP, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-F MG, D13B-F MG (FE), D13B-N MH, D13B-N MH (FE), D13B-B MP, D13B-D MP, D13B-J MP, D13B-M MP, D13C1-A MH, D13C2-A MH, D13C3-B MG, D13C1-B MG, D13C4-B MG, D13C2-B MG, D13C2-A MG, D13C1-A MG