Skip to product information
1 of 1

994826 Hexagon Nut | Genuine Volvo Penta Part

994826 Hexagon Nut | Genuine Volvo Penta Part

Regular price $1.17 AUD
Regular price Sale price $1.17 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

Available on request — contact us

As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Genuine Volvo Penta hexagon nut, part number 994826, listed in the Fasteners and Fixings group. It secures a stud or bolt at a joint, holding the clamp load on the assembly against the vibration that would otherwise slacken it. Volvo Penta publishes no fitment, dimensions or assembly detail against this number, so check it against the parts list for your own engine before ordering.

⚙️ Key Features

  • Genuine Volvo Penta hexagon nut
  • Fasteners and Fixings group
  • Fastener — tighten to the figure in the manual for your engine
  • No fitment or dimensions published against this number — check it against the parts list for your engine

🔌 Function

Secures a stud or bolt at a joint, holding the clamp load on the assembly against the vibration that would otherwise slacken it.

⚠️ Common Signs of Failure

  • Nuts found slack, backed off or missing, particularly on mountings and joints that see vibration
  • A joint working, knocking or leaking because the fastener has lost its clamping load
  • Corroded or seized nuts, or ones that will not undo without rounding the flats
  • A locking nut that spins freely down its thread, showing the locking feature is spent

🛠️ Service Notes

  • Check the stud or bolt thread is clean and undamaged and run the nut down by hand first; grit on the thread gives a false torque reading
  • Tighten to the torque in the workshop manual for your engine, following the specified sequence on multi-fastener joints and working round in stages so the load comes up evenly
  • Renew self-locking and all-metal locking nuts rather than reusing them — once the locking feature has been through a cycle it no longer holds reliably
  • Fit the washer, tab or locking arrangement that belongs with that joint; a locking device that was bent or crimped in service should be replaced, not straightened and reused
  • Marine-grade anti-seize on stainless threads reduces galling and makes later removal possible, but keep it off threads that must take a locking compound

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details