996570 Flange Screw | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta flange screw weighing 0.132 kg and listed for 6 applications across the IPS and D ranges.

🚤 Compatibility

Typically suits:

• Volvo Penta IPS15-C
• Volvo Penta D8A2-A MP
• Volvo Penta D8A4-A MP
• Volvo Penta IPS15-B
• Volvo Penta IPS15-A
• Volvo Penta D8A8-A MP

• Engine Family: IPS, D

⚙️ Key Features

• 0.132 kg
• 6 applications across the IPS and D ranges
• 16 used per assembly

🔌 Function

Clamps two components together, its integral flange spreading the clamp load so no separate washer is needed.

⚠️ Common Signs of Failure

• Joint working loose or weeping at the face
• Serrations under the flange worn smooth or bedded in
• Head rounded off or the drive faces chewed
• Thread stripped, galled or picked up on removal

🛠️ Service Notes

• The integral flange spreads the load and forms the bearing face, so do not add a separate washer unless the workshop manual for your engine specifically calls for one
• Clean the threads and the seating face before fitting — grit, paint or old sealant under the flange gives a false torque reading and the joint will slacken off in service
• Where the flange is serrated it must bear directly on clean metal to grip; discard any screw with a deformed flange or damaged serrations rather than reusing it
• Tighten to the torque and sequence given in the workshop manual for your engine, and treat the screw as single-use where the manual specifies an angle-tightened or stretch fastener
• Check the thread in the receiving component at the same time; a pulled or corroded thread will not hold a new screw however carefully it is torqued

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging