996675 Hose Clamp | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta hose clamp from the fastening, spacing, locking and support group, weighing 0.052 kg and listed for 19 applications across the D and TAD engine series.

🚤 Compatibility

Typically suits:

• Volvo Penta D11C1-A MP
• Volvo Penta D11C3-A MP
• Volvo Penta D11C2-A MP
• Volvo Penta TAD840GE
• Volvo Penta TAD552VE
• Volvo Penta TAD853VE
• Volvo Penta D11C4-A MP
• Volvo Penta D11B3-A MP
• Volvo Penta D11B4-A MP
• Volvo Penta D11B2-A MP
• Volvo Penta D11B1-A MP
• Volvo Penta TAD580-83VE
• Volvo Penta TAD570-72VE
• Volvo Penta TAD570-71VE-B
• Volvo Penta TAD550-51VE
• Volvo Penta TAD540-42VE
• Volvo Penta TAD840-43VE
• Volvo Penta TAD850-52VE
• Volvo Penta TAD870-73VE

• Engine Family: D, TAD

⚙️ Key Features

• 0.052 kg
• 19 applications across the D and TAD series
• Quantity varies by assembly, most commonly two

🔌 Function

Draws tight around a hose to hold it on its spigot and keep the joint sealed under pressure.

⚠️ Common Signs of Failure

• Weeping, dripping or a wet trail at the hose joint
• Band rusted, pitted or split at the slots
• Screw or worm drive seized so the clamp will not tighten
• Hose creeping off the spigot under pressure
• Band cut into the hose wall from over-tightening

🛠️ Service Notes

• Renew clamps rather than reusing corroded ones on raw water and fuel joints, where a failed clamp means water ingress or a fuel leak
• Re-check the clamp after the first run, as a new hose beds down and the joint loses tension

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging