9990157 Press Tool | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta press tool weighing 0.39 kg, used to press a component squarely into position under bench-press or puller load rather than by striking it. Volvo's own special tools catalogue confirms the designation and names the engines: the D11 range, the D9 range from D9-425 to the D9A2 engines, the TAD1140 to TAD1172 series and the TAD1640 to TAD1672 range with the TWD1643GE and TWD1644GE generating sets. Four other press tools are listed here, from 9992666 at 0.318 kg up to 9990176 at 5.398 kg, and they are not interchangeable, so order the number the procedure calls for.

⚙️ Key Features

• Listed for the D9 and D11 ranges and the TAD1140 to TAD1672 series
• Product-specific press tool, not a universal one
• 0.39 kg
• One of five press tools listed here
• Not interchangeable with the other press tools

🔌 Function

Transmits press load to a component across a controlled face, so it enters its bore square and undamaged.

⚠️ Common Signs of Failure

• Pressing face bruised, burred or no longer flat
• Tool cocking in use so the component enters at an angle
• Cracks or mushrooming around the loaded end
• Corrosion or pitting on the working face

🛠️ Service Notes

• Dress any burr off the pressing face before use, since a raised edge marks the component it presses on
• Support the component squarely under the press before applying load

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging