AMSOIL HP Marine® Synthetic 2-Stroke Oil - CARTON OF 4 X One Gallon bottles (3.78 Litres) XD100 Equivalent

HP Marine® Synthetic 2-Stroke Oil - 1 Gallon (3.78 Litres)

CARTON OF 4 x one gallon bottles - discounted for bulk purchase

High-quality oil is critical for maximum performance in modern two stroke

marine motors. Direct fuel injection (DFI) improves combustion

efficiency, delivering the extra power boaters want, while leaner gas to oil

ratios provide the reduced exhaust emissions the government mandates.

The leaner ratio leaves less oil to lubricate and protect these hotter,

more powerful motors, which invites deposits and wear that threaten

engine performance and life. HP Marine is proven to excel in these harsh

conditions. It controls performance-robbing friction, heat and wear, yet

produces low smoke and has low aquatic toxicity properties. It's an oil as

advanced as the engines it protects.

Replaces Evinrude Johnson OMC - XD100:

Evinrude® E-TEC™ marine engines are unique in that they offer an alternative,

lean-mix setting that allows the engine to use less oil. Whether programmed

to operate at the standard mix ratio or reprogrammed to the lean-mix setting,

E-TEC engines use sophisticated electronic equipment to monitor conditions,

including rpm and throttle position, to determine the appropriate gas-to-oil

mixture. To use the lean-mix setting, however, customers must have their

engines reprogrammed by an Evinrude dealer and agree to use Evinrude

XD100™ oil exclusively, often at a higher cost compared to other oils.

Bombardier Recreational Products (BRP®), the manufacturer of Evinrude

E-TEC engines, has not established a performance specification against

which to qualify other oils.

As demonstrated in real-world, severe-service testing, AMSOIL HP Marine Synthetic 2-Stroke Oil meets

the stringent performance needs of Evinrude® E-TEC marine engines programmed for reduced oil

consumption. Operated simultaneously with an engine lubricated with Evinrude XD100, an identical engine

lubricated with HP Marine demonstrated strong performance and excelled in critical-component lubrication.

The cylinder bores, for example, demonstrated 0.00 percent scuffing, while the main bearings demonstrated

only trace to light wear. The engine also displayed no ring deposits, earning perfect merit ratings. Finally,

HP Marine effectively limited deposits throughout the engine and met the increased performance demands

required by the lean-mix setting. Results prove the effectiveness of AMSOIL HP Marine Synthetic 2-Stroke Oil

in Evinrude E-TEC applications.

AMSOIL fully supports the use of HP Marine as a replacement for Evinrude XD100 in Evinrude

E-TEC engines, and warrants its use according to the AMSOIL Limited Liability Warranty (G1363).

APPLICATIONS:

Use in two-stroke marine applications that specify TC-W3, including those made by Johnson/Evinrude,* FICHT,* E-TEC,* Mercury* EFI & Optimax,* Yamaha,* Nissan,* Tohatsu* TLDI,* Suzuki,* Mariner,* Force.* Use as injection oil or can be used as 50:1 premix

COMPATIBILITY:

Compatible with mineral and synthetic TC-W3-type two-stroke oils; however, mixing two-stroke oils should be minimized.

Outstanding Wear Protection

The elevated heat and friction of modern two-stroke marine motors can exceed the

film strength of inferior oils, increasing the likelihood of scuffing and wear. HP Marine's

exclusive synthetic formulation provides increased lubricity for reduced wear during

normal and lean-mix operation.

Excellent Deposit Control

HP Marine is formulated with MAXDOSE,™ a system of advanced additives for

"super-clean" operation. It helps prevent deposits that lead to poor performance.

In field testing, HP Marine prevented ring sticking and ring jacking (carbon buildup

behind the ring, forcing it outward), a phenomenon that occurs in modern DFI outboard

motors. It also virtually eliminated exhaust port deposits for reliable, efficient operation.

TYPICAL TECHNICAL PROPERTIES:

HP Marine® Synthetic 2-Stroke Oil

Kinematic Viscosity @ 100ºC, cSt (ASTM D445) - 7.3

Kinematic Viscosity @ 40ºC, cSt (ASTM D445) - 37.3

Viscosity Index (ASTM D2270) - 160

Pour Point ºC (ºF) (ASTM D97) - -55 (-67)

Flash Point ºC (ºF) (ASTM D92) - 104 (219)

Fire Point ºC (ºF) (ASTM D92) - 104 (219)

Brookfield Viscosity @ -40ºC, cP (ASTM D2983) - 13,696

NMMA TC-W3® Rust Test - Pass

Jaso M 342-92 Smoke Test (FD) - Pass

TC-W3 Lubricity Test (ASTM D4863) - Pass

OECD - Guideline 203, Fish Acute Toxicity Test - 100% Survival Rate

OECD - Guideline 202, Daphnia Acute Immobilization Test - 100% Survival Rate

WARRANTY SECURE

HP Marine Synthetic 2-Stroke Oil is Warranty Secure, keeping your factory warranty intact. HP Marine is a high-performance replacement for vehicle manufacturer-branded products and is also backed by the AMSOIL Limited Warranty (G1363). For details, visit AMSOIL.com/warrantysecure.