NPCDP12VNX120-7 Power Crank 110 AH 800 CCA Battery | Dual Purpose AGM Automotive Deep Cycle Starting

🔧 Product Description

Power Crank Dual Purpose AGM Automotive Deep Cycle Starting Battery - Part Number: NPCDP12VNX120-7

POWER AGM Dual Purpose Automotive series batteries are an absorbed glass mat (AGM) sealed, maintenance-free battery featuring several design elements to provide optimum performance.

Robust plates extend the life cycle of the battery. A glass-fibre separator isolates the positive and negative plates while acting as a pad to absorb the electrolyte, and is held under compression to assure contact with the plate surfaces. A computer-generated grid design is optimised for high power density, and a low-calcium grid alloy reduces gas emissions; a flame-arresting, one-way pressure relief vent prevents build-up of excessive pressure. The battery is low-temperature tolerant, shock and vibration resistant, and has low internal resistance for higher discharge current and higher charging efficiency.

⚙️ Key Features

• Valve-regulated, maintenance-free AGM design with a long service life, suitable for deep cycle use
• The electrolyte is absorbed in the AGM separator rather than sitting as free liquid, reducing acid stratification and prolonging service life
• The safety valve maintains internal pressure and recombines the hydrogen and oxygen produced into water, greatly reducing water loss
• Thickened, dense rib grid design for excellent corrosion resistance
• Rounded, chamfered grid design will not pierce the separator or cause a short circuit
• Roughened cast-grid surface for tighter bonding with the paste
• Special grid alloy formula for great corrosion resistance, optimised for deep cycle conditions
• High-strength fibres added to enhance active-material binding force
• 4BS crystal seed and high-temperature commix paste process increase the 4BS skeleton content in the plate, extending active-material life
• High-temperature solidify process increases the corrosion layer on the plate grid and improves bonding strength of the active material
• Dedicated, highly acid-absorbing AGM separator holds more electrolyte in the same volume, prolonging service life
• Tightly wrapped plate avoids active-material shedding
• Thicker separator with high-strength fibres resists pulling and puncturing, preventing breakage and short circuits
• Heat-protected casing designed for under-bonnet use
• Starting-use capability (CCA)
• Cycling capability (AH)
• Marine-style terminals to connect accessories with ease
• Up to 3 years warranty

📏 Specifications

• Voltage: 12V
• Cold cranking amps (CCA): 800
• Capacity: 110 Ah
• Reserve capacity: 200 minutes
• Length: 306 mm
• Width: 168 mm
• Height: 208 mm
• Total height (incl. terminals): 233 mm
• Terminal type: MARINE TWIN
• Weight: 28.5 kg

📦 Condition

• Brand new genuine product
• Supplied in original packaging